1-866-799-5122

Fogging Parts

16 Item(s)

per page

Grid  List 

Set Descending Direction
  • Fog Riser Assembly (3 nozzle)

    Fog Riser Assembly (3 nozzle)

    SKU: #52468
    Pre-assembled 3 nozzle fog riser for high pressure fogging systems rated for 1000 PSI.
    3/8" compression fitting for copper or nylon tubing 10/24 thread
    $21.40
  • Fog Riser Assembly (1 nozzle)

    Fog Riser Assembly (1 nozzle)

    SKU: #52473
    Pre-assembled 1 nozzle fog riser
    For high pressure fogging systems
    1000 PSI rated
    3/8" compression fitting for copper or nylon tubing 10/24 thread
    $15.10
  • 52512-1

    Brass Tee 3/8"

    SKU: #52512-1
    Brass Tee is used to connect 3/8" tubing together and to divert the flow of water to other areas of the misting or fogging system.
    $6.49
  • Anti Drip Hex Series Nozzle .012 10/24

    Anti Drip Hex Series Nozzle .012 10/24

    SKU: #51423
    Fine atomizing brass hex nozzles with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .012/.30mm nozzles are ideal for use in high pressure systems in arid climates. Typical flow rate is .028 gpm at 1000PSI. This nozzle is great for humdification on patios. This nozzle is easily cleanable and provides years of clog free misting.
    $4.99
  • Anti Drip Hex Series Nozzle .008 x 10/24

    Anti Drip Hex Series Nozzle .008 x 10/24

    SKU: #51422
    Ultra-fine atomizing brass hex nozzles with a stainless steel insert that can be hand tightened and seal with an O-Ring. The nozzle is designed with a ball and spring to stop the flow of mist once the pump is shut off. The nozzle can be disassembled for easy cleaning.
    $4.99
  • Misting Nozzle .012 x 10/24

    Misting Nozzle .012 x 10/24

    SKU: #52012
    Fine atomizing nozzles have a brass body with stainless steel orifice and hand tightens with an O-Ring seal. These .012 nozzles are ideal for use in high pressure systems in climate with low humidity.
    $2.45
  • 3 Nozzle Fog Head

    3 Nozzle Fog Head

    SKU: #52459
    For high pressure 1000 PSI rated fogging systems. This 3/8" compression fitting can be placed at the end of copper or nylon tubing and has a 10/24 thread to accept 3 fogging nozzles.
    $9.95
  • Single Nozzle Fog Head

    Single Nozzle Fog Head

    SKU: #52622
    Rated for high pressure (1000 PSI) fogging systems. This 3/8" compression fitting can be placed at the end of copper or nylon tubing and has a 10/24 thread to accept a fog nozzle.
    $4.39
  • Tube Adapter 3/8" x 10/24 Thread

    Tube Adapter 3/8" x 10/24 Thread

    SKU: #52381
    Tube Adapter 3/8" x 10/24 Thread
    $7.95
  • 3/8" Slip Lok Tee

    3/8" Slip Lok Tee

    SKU: #52377
    3/8" Slip Lok Tee
    $11.30
  • 52511-1

    Brass Elbow 3/8"

    SKU: #52511-1
    Brass elbows make 90 degree connections between copper or nylon. No flaring, soldering or other preparation of tubing necessary to assemble.
    $4.99
  • Brass End Cap 3/8"

    Brass End Cap 3/8"

    SKU: #52621
    Used to cap the end of the mist line and stop the flow of water. This cap screws onto the end of any regular Brass Compression Fitting...
    $1.55

16 Item(s)

per page

Grid  List 

Set Descending Direction
Website Design & Development by VURIA