1-866-799-5122
  • Home /
  • Mist Nozzles

Mist Nozzles

Items 1 to 18 of 89 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Descending Direction
  • 52001

    Nozzle Plug 10/24

    SKU: #52001
    Replace misting nozzle with a nozzle plug to block water atomization in areas where fog and mist are not desired.
    $0.99
  • Anti-Drip Adapter, 1/2" Extention 10/24 Thread

    Anti-Drip Adapter, 1/2" Extention 10/24 Thread

    SKU: #51395
    The anti-drip adapter is used in conjunction with the ball, spring and copper misting system. The spring loaded adapter assembley closes each time the system is turned off to prevent dripping from the nozzles.
    $1.70
  • 52014

    Misting Nozzle .014 x 10/24

    SKU: #52014
    Medium-fine atomizing nozzles have a brass body with stainless steel orifice and hand tightens with an O-Ring seal. These .014 nozzles are ideal for use in low pressure systems.
    $2.35
  • Misting Nozzle .012 x 10/24

    Misting Nozzle .012 x 10/24

    SKU: #52012
    Fine atomizing nozzles have a brass body with stainless steel orifice and hand tightens with an O-Ring seal. These .012 nozzles are ideal for use in high pressure systems in climate with low humidity.
    $2.35
  • Misting Nozzle .006 x 10/24

    Misting Nozzle .006 x 10/24

    SKU: #52013
    Ultra-fine, ultra low flow atomizing nozzles have a brass body with stainless steel orifice and hand tightens with an O-Ring seal. These .006/.15mm nozzles are ideal for use in high pre
    $2.35
  • Misting Nozzle .008 x 10/24

    Misting Nozzle .008 x 10/24

    SKU: #52008
    Ultra-fine atomizing nozzles have a brass body with stainless steel orifice and hand tightens. These .008/.2mm nozzles are ideal for use in high pressure systems in humid climates. This nozzle should not to be used at pressures below 250 PSI. Typical flow rate is .020 gpm.
    $2.35
  • Misting Nozzle .020 x 10/24

    Misting Nozzle .020 x 10/24

    SKU: #52020
    Medium-fine atomizing nozzles have a brass body with stainless steel orifice and hand tightens with an O-Ring seal. These .020 nozzles are ideal for use in low pressure systems.
    $2.35
  • Hex Series Nozzle .012 x 10/24

    Hex Series Nozzle .012 x 10/24

    SKU: #51403
    Fine atomizing brass hex nozzle with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .012 nozzles are ideal for use in high pressure systems in climate with low humidity. Typical flow rate is .026 gpm at 1000PSI.
    $2.59
  • Hex Series Nozzle .016 x 12/24

    Hex Series Nozzle .016 x 12/24

    SKU: #51464
    Medium-fine atomizing brass hex nozzles with a stainless steel insert and hand tightens with an O-Ring seal. These .016 nozzles are ideal for use in low pressure systems. Typical flow rate is .040 gpm at 1000 PSI
    $2.59
  • Hex Series Nozzle .028 x 12/24

    Hex Series Nozzle .028 x 12/24

    SKU: #51467
    Medium atomizing brass hex nozzles have a brass body with stainless steel orifice and hand tightens with an O-Ring seal.
    $2.59
  • Hex Series Nozzle .006 x 10/24

    Hex Series Nozzle .006 x 10/24

    SKU: #51401
    Ultra-fine, ultra low flow atomizing brass hex nozzle with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .006/.15mm nozzles are ideal for use in high pressure systems in humid climates. This nozzle should not to be used at pressures below 500 PSI. Typical flow rate is .013 gpm at 1000PSI.
    $2.59
  • Hex Series Nozzle .008 x 12/24

    Hex Series Nozzle .008 x 12/24

    SKU: #51462
    Ultra-fine atomizing brass hex nozzle with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .008/.2mm nozzles are ideal for use in high pressure systems in humid climates. This nozzle should not to be used at pressures below 250 PSI. Typical flow rate is .020 gpm.
    $2.59
  • Hex Series Nozzle .008 x 10/24

    Hex Series Nozzle .008 x 10/24

    SKU: #51402
    Ultra-fine atomizing brass hex nozzle with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .008/.2mm nozzles are ideal for use in high pressure systems in humid climates. This nozzle should not to be used at pressures below 250 PSI. Typical flow rate is .020 gpm.
    $2.59
  • Hex Series Nozzle .012 x 12/24

    Hex Series Nozzle .012 x 12/24

    SKU: #51463
    Fine atomizing brass hex nozzle with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .012 nozzles are ideal for use in high pressure systems in climate with low humidity. Typical flow rate is .026 gpm at 1000PSI.
    $2.59
  • Hex Series Nozzle .024 x 12/24

    Hex Series Nozzle .024 x 12/24

    SKU: #51466
    Medium atomizing brass hex nozzles have a brass body with stainless steel orifice and hand tightens with an O-Ring seal.
    $2.59

Items 1 to 18 of 89 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Descending Direction
SHOPPING OPTIONS

Shopping Options

Category
  1. Brass Series Nozzles 10/24 (24)
  2. Stainless Steel Nozzles (15)
  3. Low Pressure Anti-Drip Nozzles 10/24 (7)
  4. Nozzle Extensions (7)
  5. Anti-Drip Adapters (3)
  6. 1/8" MNPT x 10/24 Adapter (1)
  7. Fog Nozzle Adapters (4)
  8. Drain Valves (1)
  9. Nozzle Cleaner and O-Rings (2)
  10. 12-24 Non-Standard Nozzles (20)
  11. 1/8" NPT Stainless Steel Nozzles (9)
Price
  1. $0.00 - $9.99 (74)
  2. $10.00 - $19.99 (12)
  3. $20.00 and above (3)
My Cart

You have no items in your shopping cart.

Compare Products

You have no items to compare.

Website Design & Development by VURIA