Ultra-fine atomizing brass hex nozzles with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .008/.2mm nozzles are ideal for use in high pressure systems in humid climates. This nozzle should not to be used at pressures below 250 PSI. Typical flow rate is .020 gpm. This nozzle is easily cleanable and provides years of clog free misting.
Fine, low flow atomizing brass hex nozzles with stainless steel insert that can be hand tightened and seal with an O-Ring. These .012/.30mm nozzles are ideal for use in high pressure systems in arid climates. Typical flow rate is .028 gpm at 1000PSI. This nozzle is great for humdification on patios. This nozzle is easily cleanable and provides years of clog free misting.
Medium-fine atomizing brass hex nozzles with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .016/.4mm nozzles are ideal for use in high pressure systems in humid climates. Typical flow rate is .040 gpm. This nozzle is easily cleanable and provides years of clog free misting.
Fine atomizing brass hex nozzle with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .012 nozzles are ideal for use in high pressure systems in climate with low humidity. Typical flow rate is .026 gpm at 1000PSI.
Medium-fine atomizing brass hex nozzles with a stainless steel insert and hand tightens with an O-Ring seal. These .016 nozzles are ideal for use in low pressure systems. Typical flow rate is .040 gpm at 1000 PSI
Fine atomizing stainless steel hex nozzles that can be hand tightened and seal with an O-Ring. These .012 nozzles are ideal for use in high pressure systems in climate with low humidity. Typical flow rate is .026 gpm at 1000PSI.
Ultra-fine atomizing stainless steel hex nozzle that can be hand tightened and seal with an O-Ring. These .008/.2mm nozzles are ideal for use in high pressure systems in humid climates. This nozzle should not to be used at pressures below 250 PSI. Typical flow rate is .020 gpm.
