1-866-799-5122

Brass Anti-Drip Hex Nozzles

6 Item(s)

per page

Grid  List 

Set Descending Direction
  • AD Hex Series Nozzle .016 x 12/24

    AD Hex Series Nozzle .016 x 12/24

    SKU: #51484
    Medium-fine atomizing brass hex nozzles with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .016/.4mm nozzles are ideal for use in high pressure systems in humid climates. Typical flow rate is .040 gpm. This nozzle is easily cleanable and provides years of clog free misting.
    $4.99
  • AD Hex Series Nozzle .008 x 12/24

    AD Hex Series Nozzle .008 x 12/24

    SKU: #51482
    Ultra-fine atomizing brass hex nozzles with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .008/.2mm nozzles are ideal for use in high pressure systems in humid climates. This nozzle should not to be used at pressures below 250 PSI. Typical flow rate is .020 gpm. This nozzle is easily cleanable and provides years of clog free misting.
    $4.99
  • AD Hex Series Nozzle .028 x 12/24

    AD Hex Series Nozzle .028 x 12/24

    SKU: #51487
    Medium-fine atomizing brass hex nozzles with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .028/.7mm nozzles are ideal for use in high pressure systems in humid climates. Typical flow rate is .066 gpm. This nozzle is easily cleanable and provides years of clog free misting.
    $4.99
  • AD Hex Series Nozzle .020 x 12/24

    AD Hex Series Nozzle .020 x 12/24

    SKU: #51485
    Medium-fine atomizing brass hex nozzles with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .020/.5mm nozzles are ideal for use in high pressure systems in humid climates. Typical flow rate is .050 gpm. This nozzle is easily cleanable and provides years of clog free misting.
    $4.99
  • AD Hex Series Nozzle .012 x 12/24

    AD Hex Series Nozzle .012 x 12/24

    SKU: #51483
    Fine, low flow atomizing brass hex nozzles with stainless steel insert that can be hand tightened and seal with an O-Ring. These .012/.30mm nozzles are ideal for use in high pressure systems in arid climates. Typical flow rate is .028 gpm at 1000PSI. This nozzle is great for humdification on patios. This nozzle is easily cleanable and provides years of clog free misting.
    $4.99
  • AD Hex Series Nozzle .024 x 12/24

    AD Hex Series Nozzle .024 x 12/24

    SKU: #51486
    Medium-fine atomizing brass hex nozzles with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .024/.6mm nozzles are ideal for use in high pressure systems in humid climates. Typical flow rate is .056 gpm. This nozzle is easily cleanable and provides years of clog free misting.
    $4.99

6 Item(s)

per page

Grid  List 

Set Descending Direction
Website Design & Development by VURIA