1-866-799-5122

Brass Series Nozzles 10/24

7 Item(s)

per page

Grid  List 

Set Ascending Direction
  1. Hex Series Nozzle .028 x 10/24

    Hex Series Nozzle .028 x 10/24

    $2.59

    Out of stock

    Medium atomizing brass hex nozzles have a brass body with stainless steel orifice and hand tightens with an O-Ring seal. Learn More
  2. Hex Series Nozzle .024 x 10/24

    Hex Series Nozzle .024 x 10/24

    $2.59

    Medium atomizing brass hex nozzles have a brass body with stainless steel orifice and hand tightens with an O-Ring seal. Learn More
  3. Hex Series Nozzle .020 x 10/24

    Hex Series Nozzle .020 x 10/24

    $2.59

    Medium-fine atomizing brass hex nozzles have a brass body with stainless steel orifice and hand tightens with an O-Ring seal. Learn More
  4. Hex Series Nozzle .012 x 10/24

    Hex Series Nozzle .012 x 10/24

    $2.59

    Fine atomizing brass hex nozzle with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .012 nozzles are ideal for use in high pressure systems in climate with low humidity. Typical flow rate is .026 gpm at 1000PSI. Learn More
  5. Hex Series Nozzle .008 x 10/24

    Hex Series Nozzle .008 x 10/24

    $2.59

    Ultra-fine atomizing brass hex nozzle with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .008/.2mm nozzles are ideal for use in high pressure systems in humid climates. This nozzle should not to be used at pressures below 250 PSI. Typical flow rate is .020 gpm. Learn More
  6. Hex Series Nozzle .006 x 10/24

    Hex Series Nozzle .006 x 10/24

    $2.59

    Out of stock

    Ultra-fine, ultra low flow atomizing brass hex nozzle with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .006/.15mm nozzles are ideal for use in high pressure systems in humid climates. This nozzle should not to be used at pressures below 500 PSI. Typical flow rate is .013 gpm at 1000PSI. Learn More
  7. Hex Series Nozzle .004 x 10/24

    Hex Series Nozzle .004 x 10/24

    $2.59

    Super Ultra-fine, ultra low flow atomizing brass hex nozzle with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .004/.10mm nozzles are ideal for use in high pressure systems in humid climates. This nozzle should not to be used at pressures below 500 PSI. Typical flow rate is .008 gpm at 1000PSI. Learn More

7 Item(s)

per page

Grid  List 

Set Ascending Direction
Website Design & Development by VURIA