Brass Series Nozzles 10/24
-
SKU: #52001
Replace misting nozzle with a nozzle plug to block water atomization in areas where fog and mist are not desired.
-
SKU: #52020
Medium-fine atomizing nozzles have a brass body with stainless steel orifice and hand tightens with an O-Ring seal. These .020 nozzles are ideal for use in low pressure systems.
-
SKU: #52504
Designed with the home owner in mind, these standard .014 orifice misting (medium fine) nozzles are easy to install and require no special tools. For low or high pressure misting systems, 6 pcs.
All brass with stainless steel inserts (.014 orifice - medium fine)
10/24 Thread
Low water usage
For low or high pressure misting
Easy to install
-
SKU: #52502
Designed with the home owner in mind, these standard .014 orifice misting (medium fine) nozzles are easy to install and require no special tools. For low or high pressure misting systems, 3 pcs.
All brass with stainless steel inserts (.014 orifice - medium fine)
10/24 Thread
Low water usage
For low or high pressure misting
Easy to install
-
SKU: #52014
Medium-fine atomizing nozzles have a brass body with stainless steel orifice and hand tightens with an O-Ring seal. These .014 nozzles are ideal for use in low pressure systems.
-
SKU: #52411
Designed with the home owner in mind, these standard .012 orifice misting (fine) nozzles are easy to install and require no special tools. For low or high pressure misting systems, 6 pcs.
All brass with stainless steel inserts (.012 orifice - medium fine)
10/24 Thread
For low or high pressure misting or fogging systems
Low water usage
Easy to install
-
SKU: #52012
Fine atomizing nozzles have a brass body with stainless steel orifice and hand tightens with an O-Ring seal. These .012 nozzles are ideal for use in high pressure systems in climate with low humidity.
-
SKU: #52008
Ultra-fine atomizing nozzles have a brass body with stainless steel orifice and hand tightens. These .008/.2mm nozzles are ideal for use in high pressure systems in humid climates. This nozzle should not to be used at pressures below 250 PSI. Typical flow rate is .020 gpm.
-
SKU: #52013
Ultra-fine, ultra low flow atomizing nozzles have a brass body with stainless steel orifice and hand tightens with an O-Ring seal. These .006/.15mm nozzles are ideal for use in high pre
-
SKU: #51407
Medium atomizing brass hex nozzles have a brass body with stainless steel orifice and hand tightens with an O-Ring seal.
-
SKU: #51406
Medium atomizing brass hex nozzles have a brass body with stainless steel orifice and hand tightens with an O-Ring seal.
-
SKU: #51405
Medium-fine atomizing brass hex nozzles have a brass body with stainless steel orifice and hand tightens with an O-Ring seal.
-
SKU: #51403
Fine atomizing brass hex nozzle with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .012 nozzles are ideal for use in high pressure systems in climate with low humidity. Typical flow rate is .026 gpm at 1000PSI.
-
SKU: #51402
Ultra-fine atomizing brass hex nozzle with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .008/.2mm nozzles are ideal for use in high pressure systems in humid climates. This nozzle should not to be used at pressures below 250 PSI. Typical flow rate is .020 gpm.
-
SKU: #51401
Ultra-fine, ultra low flow atomizing brass hex nozzle with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .006/.15mm nozzles are ideal for use in high pressure systems in humid climates. This nozzle should not to be used at pressures below 500 PSI. Typical flow rate is .013 gpm at 1000PSI.
-
SKU: #51400
Super Ultra-fine, ultra low flow atomizing brass hex nozzle with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .004/.10mm nozzles are ideal for use in high pressure systems in humid climates. This nozzle should not to be used at pressures below 500 PSI. Typical flow rate is .008 gpm at 1000PSI.
-
SKU: #51427
Medium atomizing brass hex nozzles with a stainless steel insert and hand tightens with an O-Ring seal. The nozzle is designed with a ball and spring to stop the flow of mist once the pump is shut off. The nozzle can be dissasembled for easy cleaning.
-
SKU: #51426
Medium atomizing brass hex nozzles with a stainless steel insert and hand tightens with an O-Ring seal. The nozzle is designed with a ball and spring to stop the flow of mist once the pump is shut off. The nozzle can be dissasembled for easy cleaning.
