Brass Series Nozzles 10/24
-
SKU: #51420
Ultra-fine, ultra low flow atomizing brass hex nozzles with stainless steel insert that can be hand tightened and seal with an O-Ring. The nozzle is designed with a ball and spring to stop the flow of mist once the pump is shut off. The nozzle can be dissasembled for easy cleaning.
-
SKU: #51421
Ultra-fine, ultra low flow atomizing brass hex nozzles with a stainless steel insert that can be hand tightened and seal with an O-Ring. The nozzle is designed with a ball and spring to stop the flow of mist once the pump is shut off. The nozzle can be dissasembled for easy cleaning.
-
SKU: #51422
Ultra-fine atomizing brass hex nozzles with a stainless steel insert that can be hand tightened and seal with an O-Ring. The nozzle is designed with a ball and spring to stop the flow of mist once the pump is shut off. The nozzle can be dissasembled for easy cleaning.
-
SKU: #51423
Fine atomizing brass hex nozzles with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .012/.30mm nozzles are ideal for use in high pressure systems in arid climates. Typical flow rate is .028 gpm at 1000PSI. This nozzle is great for humdification on patios. This nozzle is easily cleanable and provides years of clog free misting.
-
SKU: #51424
Medium-fine atomizing brass hex nozzles with a stainless steel insert and hand tightens with an O-Ring seal. The nozzle is designed with a ball and spring to stop the flow of mist once the pump is shut off. The nozzle can be dissasembled for easy cleaning.
-
SKU: #51425
Medium atomizing brass hex nozzles with a stainless steel insert and hand tightens with an O-Ring seal. The nozzle is designed with a ball and spring to stop the flow of mist once the pump is shut off. The nozzle can be dissasembled for easy cleaning.
-
SKU: #51426
Medium atomizing brass hex nozzles with a stainless steel insert and hand tightens with an O-Ring seal. The nozzle is designed with a ball and spring to stop the flow of mist once the pump is shut off. The nozzle can be dissasembled for easy cleaning.
-
SKU: #51427
Medium atomizing brass hex nozzles with a stainless steel insert and hand tightens with an O-Ring seal. The nozzle is designed with a ball and spring to stop the flow of mist once the pump is shut off. The nozzle can be dissasembled for easy cleaning.
-
SKU: #51400
Super Ultra-fine, ultra low flow atomizing brass hex nozzle with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .004/.10mm nozzles are ideal for use in high pressure systems in humid climates. This nozzle should not to be used at pressures below 500 PSI. Typical flow rate is .008 gpm at 1000PSI.
-
SKU: #51401
Ultra-fine, ultra low flow atomizing brass hex nozzle with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .006/.15mm nozzles are ideal for use in high pressure systems in humid climates. This nozzle should not to be used at pressures below 500 PSI. Typical flow rate is .013 gpm at 1000PSI.
-
SKU: #51402
Ultra-fine atomizing brass hex nozzle with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .008/.2mm nozzles are ideal for use in high pressure systems in humid climates. This nozzle should not to be used at pressures below 250 PSI. Typical flow rate is .020 gpm.
-
SKU: #51403
Fine atomizing brass hex nozzle with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .012 nozzles are ideal for use in high pressure systems in climate with low humidity. Typical flow rate is .026 gpm at 1000PSI.
-
SKU: #51405
Medium-fine atomizing brass hex nozzles have a brass body with stainless steel orifice and hand tightens with an O-Ring seal.
-
SKU: #51406
Medium atomizing brass hex nozzles have a brass body with stainless steel orifice and hand tightens with an O-Ring seal.
-
SKU: #51407
Medium atomizing brass hex nozzles have a brass body with stainless steel orifice and hand tightens with an O-Ring seal.
-
SKU: #52013
Ultra-fine, ultra low flow atomizing nozzles have a brass body with stainless steel orifice and hand tightens with an O-Ring seal. These .006/.15mm nozzles are ideal for use in high pre
-
SKU: #52008
Ultra-fine atomizing nozzles have a brass body with stainless steel orifice and hand tightens. These .008/.2mm nozzles are ideal for use in high pressure systems in humid climates. This nozzle should not to be used at pressures below 250 PSI. Typical flow rate is .020 gpm.
-
SKU: #52012
Fine atomizing nozzles have a brass body with stainless steel orifice and hand tightens with an O-Ring seal. These .012 nozzles are ideal for use in high pressure systems in climate with low humidity.
