1-866-799-5122

Brass Series Nozzles 10/24

Items 1 to 20 of 29 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Ascending Direction
  1. 52001

    Stainless Steel Nozzle Plug 10/24

    $2.80

    Replace misting nozzle with a nozzle plug to block water atomization in areas where fog and mist are not desired. Learn More
  2. Replacement Brass Hex Nozzle Head .012

    Replacement Brass Hex Nozzle Head .012

    $2.45

    Replacement brass hex nozzle head .012 for sku 51423. Fits any 10/24 thread anti-drip nozzle assembly in this category of nozzles. Learn More
  3. Replacement Brass Hex Nozzle Head .008

    Replacement Brass Hex Nozzle Head .008

    $2.45

    Replacement brass hex nozzle head .008 for sku 51422. Fits any 10/24 thread anti-drip nozzle assembly in this category of nozzles. Learn More
  4. Replacement Brass Hex Nozzle Head .006

    Replacement Brass Hex Nozzle Head .006

    $2.45

    Replacement brass hex nozzle head .006 for sku 51421. Fits any 10/24 thread anti-drip nozzle assembly in this category of nozzles. Learn More
  5. 52001

    Nozzle Plug 10/24

    $0.99

    Replace misting nozzle with a nozzle plug to block water atomization in areas where fog and mist are not desired. Learn More
  6. Misting Nozzle .020 x 10/24

    Misting Nozzle .020 x 10/24

    $2.45

    Medium-fine atomizing nozzles have a brass body with stainless steel orifice and hand tightens with an O-Ring seal. These .020 nozzles are ideal for use in low pressure systems. Learn More
  7. Misting Nozzle .014 x 10/24 (6 Pieces)

    Misting Nozzle .014 x 10/24 (6 Pieces)

    $14.70

    Designed with the home owner in mind, these standard .014 orifice misting (medium fine) nozzles are easy to install and require no special tools. For low or high pressure misting systems, 6 pcs. All brass with stainless steel inserts (.014 orifice - medium fine) 10/24 Thread Low water usage For low or high pressure misting Easy to install Learn More
  8. Misting Nozzle .014 x 10/24 (3 Pieces)

    Misting Nozzle .014 x 10/24 (3 Pieces)

    $7.35

    Designed with the home owner in mind, these standard .014 orifice misting (medium fine) nozzles are easy to install and require no special tools. For low or high pressure misting systems, 3 pcs. All brass with stainless steel inserts (.014 orifice - medium fine) 10/24 Thread Low water usage For low or high pressure misting Easy to install Learn More
  9. 52014

    Misting Nozzle .014 x 10/24

    $2.45

    Medium-fine atomizing nozzles have a brass body with stainless steel orifice and hand tightens with an O-Ring seal. These .014 nozzles are ideal for use in low pressure systems. Learn More
  10. Misting Nozzle .012 x 10/24 (6 Pieces)

    Misting Nozzle .012 x 10/24 (6 Pieces)

    $13.99

    Designed with the home owner in mind, these standard .012 orifice misting (fine) nozzles are easy to install and require no special tools. For low or high pressure misting systems, 6 pcs. All brass with stainless steel inserts (.012 orifice - medium fine) 10/24 Thread For low or high pressure misting or fogging systems Low water usage Easy to install Learn More
  11. Misting Nozzle .012 x 10/24

    Misting Nozzle .012 x 10/24

    $2.45

    Fine atomizing nozzles have a brass body with stainless steel orifice and hand tightens with an O-Ring seal. These .012 nozzles are ideal for use in high pressure systems in climate with low humidity. Learn More
  12. Misting Nozzle .008 x 10/24

    Misting Nozzle .008 x 10/24

    $2.45

    Ultra-fine atomizing nozzles have a brass body with stainless steel orifice and hand tightens. These .008/.2mm nozzles are ideal for use in high pressure systems in humid climates. This nozzle should not to be used at pressures below 250 PSI. Typical flow rate is .020 gpm. Learn More
  13. Misting Nozzle .006 x 10/24

    Misting Nozzle .006 x 10/24

    $2.45

    Ultra-fine, ultra low flow atomizing nozzles have a brass body with stainless steel orifice and hand tightens with an O-Ring seal. These .006/.15mm nozzles are ideal for use in high pressure systems in humid climates.

    Learn More
  14. Hex Series Nozzle .028 x 10/24

    Hex Series Nozzle .028 x 10/24

    $2.59

    Medium atomizing brass hex nozzles have a brass body with stainless steel orifice and hand tightens with an O-Ring seal. Learn More
  15. Hex Series Nozzle .024 x 10/24

    Hex Series Nozzle .024 x 10/24

    $2.59

    Medium atomizing brass hex nozzles have a brass body with stainless steel orifice and hand tightens with an O-Ring seal. Learn More
  16. Hex Series Nozzle .020 x 10/24

    Hex Series Nozzle .020 x 10/24

    $2.59

    Medium-fine atomizing brass hex nozzles have a brass body with stainless steel orifice and hand tightens with an O-Ring seal. Learn More
  17. Hex Series Nozzle .016 x 10/24

    Hex Series Nozzle .016 x 10/24

    $2.59

    Medium-fine atomizing brass hex nozzles with a stainless steel insert and hand tightens with an O-Ring seal. These .016 nozzles are ideal for use in low pressure systems. Typical flow rate is .040 gpm at 1000 PSI Learn More
  18. Hex Series Nozzle .012 x 10/24

    Hex Series Nozzle .012 x 10/24

    $2.59

    Fine atomizing brass hex nozzle with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .012 nozzles are ideal for use in high pressure systems in climate with low humidity. Typical flow rate is .026 gpm at 1000PSI. Learn More
  19. Hex Series Nozzle .008 x 10/24

    Hex Series Nozzle .008 x 10/24

    $2.59

    Ultra-fine atomizing brass hex nozzle with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .008/.2mm nozzles are ideal for use in high pressure systems in humid climates. This nozzle should not to be used at pressures below 250 PSI. Typical flow rate is .020 gpm. Learn More
  20. Hex Series Nozzle .006 x 10/24

    Hex Series Nozzle .006 x 10/24

    $2.59

    Out of stock

    Ultra-fine, ultra low flow atomizing brass hex nozzle with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .006/.15mm nozzles are ideal for use in high pressure systems in humid climates. This nozzle should not to be used at pressures below 500 PSI. Typical flow rate is .013 gpm at 1000PSI. Learn More

Items 1 to 20 of 29 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Ascending Direction
Website Design & Development by VURIA