Ultra-fine, ultra low flow atomizing brass hex nozzles with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .006/.15mm nozzles are ideal for use in high pressure systems in humid climates. This nozzle should not to be used at pressures below 500 PSI. Typical flow rate is .013 gpm at 1000PSI. This nozzle is easily cleanable and provides years of clog free misting. Median droplet size at 1000 psi is 5µ with a 55° spray angle.
You may also be interested in the following product(s)