Aeromist

Skip to Main Content »

Search Site

Category Navigation:

You're currently on:

My Cart

You have no items in your shopping cart.

Compare Products

You have no items to compare.

 

Brass Hex Series Nozzles

7 Item(s) Show per page
View as: Grid  List  Sort by Set Descending Direction

  1. Hex Series Nozzle .004 x 10/24

    Hex Series Nozzle .004 x 10/24
    SKU: #51400
    Super Ultra-fine, ultra low flow atomizing brass hex nozzle with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .004/.10mm nozzles are ideal for use in high pressure systems in humid climates. This nozzle should not to be used at pressures below 500 PSI. Typical flow rate is .008 gpm at 1000PSI.
    $2.59


    Add to Compare

  2. Hex Series Nozzle .006 x 10/24

    Hex Series Nozzle .006 x 10/24
    SKU: #51401
    Ultra-fine, ultra low flow atomizing brass hex nozzle with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .006/.15mm nozzles are ideal for use in high pressure systems in humid climates. This nozzle should not to be used at pressures below 500 PSI. Typical flow rate is .013 gpm at 1000PSI.
    $2.59


    Add to Compare

  3. Hex Series Nozzle .008 x 10/24

    Hex Series Nozzle .008 x 10/24
    SKU: #51402
    Ultra-fine atomizing brass hex nozzle with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .008/.2mm nozzles are ideal for use in high pressure systems in humid climates. This nozzle should not to be used at pressures below 250 PSI. Typical flow rate is .020 gpm.
    $2.59


    Add to Compare

  1. Hex Series Nozzle .012 x 10/24

    Hex Series Nozzle .012 x 10/24
    SKU: #51403
    Fine atomizing brass hex nozzle with a stainless steel insert that can be hand tightened and seal with an O-Ring. These .012 nozzles are ideal for use in high pressure systems in climate with low humidity. Typical flow rate is .026 gpm at 1000PSI.
    $2.59


    Add to Compare

  2. Hex Series Nozzle .016 x 10/24

    Hex Series Nozzle .016 x 10/24
    SKU: #51404
    Medium-fine atomizing brass hex nozzles with a stainless steel insert and hand tightens with an O-Ring seal. These .016 nozzles are ideal for use in low pressure systems. Typical flow rate is .040 gpm at 1000 PSI
    $2.59


    Add to Compare

  3. Hex Series Nozzle .020 x 10/24

    Hex Series Nozzle .020 x 10/24
    SKU: #51405
    Medium-fine atomizing brass hex nozzles have a brass body with stainless steel orifice and hand tightens with an O-Ring seal.
    $2.59


    Add to Compare

  1. Hex Series Nozzle .024 x 10/24

    Hex Series Nozzle .024 x 10/24
    SKU: #51406
    Medium atomizing brass hex nozzles have a brass body with stainless steel orifice and hand tightens with an O-Ring seal.
    $2.59


    Add to Compare

Website Design & Development by VURIA